§ 121.425 – Flight engineers: Initial and transition flight training.
(a) Initial and transition flight training for flight engineers must include at least the following:
(1) Training and practice in procedures related to the carrying out of flight engineer duties and functions. This training and practice may be accomplished either inflight, in an airplane simulator, or in a training device.
(2) A flight check that includes—
(i) Preflight inspection;
(ii) Inflight performance of assigned duties accomplished from the flight engineer station during taxi, runup, takeoff, climb, cruise, descent, approach, and landing;
(iii) Accomplishment of other functions, such as fuel management and preparation of fuel consumption records, and normal and emergency or alternate operation of all airplane flight systems, performed either inflight, in an airplane simulator, or in a training device.
(b) Except as permitted in paragraph (c) of this section, the initial flight training required by paragraph (a) of this section must include at least the same number of programmed hours of flight training and practice that are specified for a second in command pilot under § 121.424(c) unless reduced under § 121.405.
(c) If the certificate holder's approved training program includes a course of training utilizing an airplane simulator or other training device under § 121.409(c), each flight engineer must successfully complete in the simulator or other training device—
(1) Training and practice in at least all of the assigned duties, procedures, and functions required by paragraph (a) of this section; and
(2) A flight check to a flight engineer level of proficiency in the assigned duties, procedures, and functions.